Our forges heat projects exceptionally faster and last exceptionally longer than the rest. Dont take our word for it, our reputation speaks for itself, just ask any one of our exceptionally satisfied customers. Another World Famous high quality custom design handcrafted by CGR Custom Blades & Forges, this Small Custom Canister Style Forge is a must have for any blacksmith regardless of skill level. Constructed with top quality materials and a versatile design, it's perfect for blade smithing or any high temp heat job. Interior consists of a hefty layer of 1 thick Ultra High Grade 10# Density Ceramic Fiber Insulation not the cheap fluffy stuff like most of the others use.
Make sure you're getting the highest density ceramic fiber otherwise you'll be getting hosed. That completely lines the entire internal surface area and is adhered to the canister using high temp furnace cement and fireplace mortar to prevent sagging and bunching. CERAMIC FIBER INSULATION IS COATED WITH RIGIDIZER TO EXTEND THE LIFE OF THE FORGE AND TO PREVENT FIBERS FROM BECOMING AIRBORNE. The entire forge has been completely coated with 3-4 coats of high quality high heat paint.
Must be painted with high heat or heat resistant paint otherwise paint will burn off when you use it. Watch out for multicolored forges not painted with high heat/heat resistant paint.
It comes equipped with an XL High Output Precision Tuned Burner that is perfectly tuned for this specific forge. NO CONFUSING INSTRUCTIONS THAT LEAVE YOU SAYING WTF? ASSEMBLY IS SO EASY JUST THREAD THE BURNER INTO THE FORGE. No aggravating and confusing "adjustments" needed. If you are not familiar with how to adjust a burner to fine tune it then you will do more damage then good with an "adjustable" burner.Our XL heavy duty inset cast iron burner nozzles are a whopping 1 1/4" -1 1/2" in diameter (not a tiny "pencil tip" style burner that takes forever to heat up). Our XL burners are inset and completely insulated to prevent meltdown. If the burner sticks out into the chamber and is not insulated it will melt. REMEMBER, your bbq grill regulator WILL NOT WORK with your forge. You WILL need to get an Adjustable High Pressure Regulator at least 0-20 psi and a propane hose with a shut off valve to run your forge. We sell a hose and hp regulator kit that is precision tuned and individually tested for optimum performance when paired with our forges. ALL OF OUR FORGES ARE VERY FUEL EFFICIENT- Our forges and burners only use 5-15 psi of propane and you reach maximum temperature (exceeding 2000 F degrees- hot enough to forge weld) at those pressures in only 3 minutes or less. All of our world famous forges are made with heavy gauge steel and the highest quality materials (no cheap knockoffs).
It also comes equipped with a convenient carrying handle with heat shield. Both ends are opened to make it easy to heat projects through and through or you can close one end off with the ceramic fiber plug (included) as shown in the photos. Outside measurements 12" L x 7" W x 15 H. Inside heat chamber (actual workspace) measures 12" L x 5" W x 5 H. What you see is what you get with our products.BEWARE OF TRICK PHOTOGRAPHY AND FUDGED MEASUREMENTS!! (Pictures/measurements taken at tricky angles to make them appear bigger/better than they actually are).
CGR Custom Blades & Forges. Chip Gore Highly Experienced Blacksmith & Metal Fabricator. We value all of our customers. Highly Experienced and highly knowledgable blacksmith and metal fabricator is always available and willing to take the time to answer any questions you may have.
If we don't happen to answer please leave a detailed message and either Chip or Cindy will return your call right away. Please note: Handcrafted and made to order, each forge is precision tuned and thoroughly inspected and tested for the highest quality performance and lifelong durability. The item "Propane Gas Forge Blacksmith Forge Custom Small Canister Style By CGR Customs" is in sale since Monday, May 8, 2017. This item is in the category "Collectibles\Tools, Hardware & Locks\Tools\Blacksmithing". The seller is "cgrcustomforges" and is located in Eldon, Missouri.This item can be shipped to United States.